Viewing Open Ports - Cisco RV180 Administration Manual

Viewing the Cisco RV180/RV180W Status

Viewing Open Ports

Viewing Open Ports
Cisco RV180/RV180W Administration Guide
The Port Statistics page displays this information:
Port
Status
Operational Mode
Packets
Bytes
Frames
The View Open Ports page displays a listing of all open ports.
To view open ports, choose Status > View Open Ports.
This page displays this information about open ports:
Proto
Recv-Q
Send-Q
Local Address
Foreign Address
State
PID/Program name
The name of the port.
The status of the port (enabled or disabled).
The bandwidth the port is operating at.
The number of received/sent packets per second.
The number of received/sent bytes of information
per second.
The number of received/sent frames per second.
The protocol (TCP, UDP, and raw) used by the port.
The number of bytes not copied by the program
connected to this port.
The number of bytes not acknowledged by the
program connected to this port.
The address and port number of the local end of
this socket.
The address and port number of the remote end of
this socket.
The state of the port.
The process ID (PID) and name of the program
using the port (for example, 1654/thttpd, where
1654 is the PID and thttpd is the program's name).
8
172