Saving Your Changes - Cisco RV180 Administration Manual

Introduction

Saving Your Changes

NOTE
Saving Your Changes
Cisco RV180/RV180W Administration Guide
Click a menu item (numbered 2 in
menu names displayed underneath to perform an action or view a sub-menu.
The RV180W menus change depending on the router mode (Router, Access Point,
WDS Bridge, or WDS Repeater) that you have configured for the RV180W. For
example, the RV180W in WDS Bridge mode displays fewer choices under the
Security menu than the RV180W in router mode.
On the RV180W, the upper right of the screen (numbered 3 in
which device mode the RV180W is running.
Figure 1 RV180W Device Manager
When you finish making changes on a configuration page, click Save (numbered 4
in Figure 1) to save the changes, or click Cancel (numbered 5 in
your changes.
Figure 1) on the left panel to expand it. Click the
1
Figure 1) shows in
Figure 1) to undo
19