BayTech 24SII Owner's Manual page 81

-----------------------------------
| Port | Logical Name
| |
-----------------------------------
| 2 |Device B
-----------------------------------
Strike any Key to Continue, or X to Exit
---------------------------------------------------
| Port | Baud | Word | Stop |Parity|
| | Rate | Size | Bits |
---------------------------------------------------
| 1 |
| 2 |
| 3 |
| 4 |
--------------------------------------------------
Strike any Key to Continue, or X to Exit
Port Select Code is
I.D. Page Message is
This Job is from
Strike any Key to Continue, or X to Exit
Copyright (c) Bay Technical Associates, 1992
Model 24SII Data Exchange System
Total memory
This Module is 1
Status.......................................1
Program Port Logical Name....................2
Set Port Designation.........................3
Program Port Select Code.....................4
Set Port Select Mode.........................5
Set Serial Port Configuration................6
Set Input Inactivity Timeout.................7
Enable/Disable Form Feed Mode................8
Program I.D. Page Message....................9
Enable/Disable I.D. Page Message.............A
Select Print Schedule for I.D. Page..........B
Program Default Printer Assignment...........C
Exit Configuration...........................X
Enter Request :
You may now make whatever changes are necessary by responding
to the above menu. The Exit function will return you to the Operations
Mode.
|I.D. Page|
(Printer) |Schedule |
| Before
9600| 8 | 1 |None
9600| 8 | 1 |None
9600| 8 | 1 |None
9600| 8 | 1 |None
:$SELECT
:
1M
|
Xon / Xoff |
| Xmit | Recv |
| Off | Off |
| Off | Off |
| Off | Off |
| Off | Off |
Rev. 2.02