Table of Contents
Advertisement
PRINTER/PLOTTER INTERFACE
To interface your EIA-232 printers or plotters to the M24SII-V07
module using 4-wire and bidirectional operation, refer to the adapter
drawing show in Figure 21 .
FIGURE 21: Printer/Plotter Adapter
BayTech Part No. 25MRJ11PR-X
IMPORTANT When modular adapters are used as shown in Figures
19 - 21 above, crossed RJ-11 cables are required. See the cable
diagram below.
FIGURE 22: Crossed RJ-11 Cable
BayTech Part No. RJ04X010 (10 feet)
Advertisement
Table of Contents
