Specifications - Central Machinery 38160 Assembly And Operating Instructions Manual

treated lumber
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as those dust masks
that are specially designed to filter out
microscopic particles. (California Health
& Safety Code § 25249.5, et seq.)
15. WARNING: Handling the cord on this
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
16. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
saVe these
instructiOns.

speciFicatiOns

Electrical Input
Motor No Load Speed 1787 RPM
Oscillations per
Minute
Oscillation Travel
Sanding Belt Capacity 3/4" - 2"
Sanding Belt Height
Sanding Thickness
Dust Collection Port
Table Tilt Angle
Page 6
120 V~ / 60 Hz / 11 A
58 OPM
7/8"
4-1/2"
3/16 - 11/16"
2"
0 - 45°
For technical questions, please call 1-800-444-3353.
unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
rev 00c; 10c
SKU 38160