Download Print this page
Central Machinery 59220 Owner's Manual & Safety Instructions

Central Machinery 59220 Owner's Manual & Safety Instructions

6" x 48" belt and 9" disc sander

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22h

Advertisement

loading
Need help?

Need help?

Do you have a question about the 59220 and is the answer not in the manual?

Questions and answers

Summary of Contents for Central Machinery 59220

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Table Of Contents

    4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 3 It’s safer than using 21. NEVER LEAVE TOOL RUNNING UNATTENDED. your hand and it frees both hands to operate tool. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 59220 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Switch when the tool is not in use. pulled into the machine. For safety, it must be adjusted very close to the sanding surface. Page 4 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 5: Specifications

    SaVE tHESE inStructiOnS. Specifications Electrical Rating 120VAC / 60  H z / 12  A Belt Size 6" W x 48" L Disc Size 9" 1800 RPM (Disc) Maximum Speed 1400 FPM (Belt) Item 59220 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Setup

    Switch during use and be removed after Switch is turned off and/or any time the Belt/Disc Sander is left unattended or in storage. Page 6 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 7 With the aid of a corner square and a level, make sure the top of the Tool Stand is level. Then, wrench tighten all of the Nuts. Item 59220 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 4. Tighten the four Bolts securely into the four threaded mounting M8  x   1 6 M8  x   1 6 holes on the Base. Hex Head Hex Head Bolt Bolt tool Stand Page 8 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 9 4. Use a hex wrench through the slot in the Disc/Pulley Housing to tighten Wrench the Set Screw on the Drive Pulley. 5. Tighten the Set Screw on the Motor Pulley. Item 59220 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 3. Use a hex wrench through Wrench the slot in the Disc/Pulley Housing to tighten the Set Screw on the Backing Disc. Page 10 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 11 Sanding Disc. 6. Tighten the two M8  x 10  m m Set Screws (50) on the table Table Support (51) to M8  x 10 Support secure the Work Table. Screw Item 59220 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Support Bracket. 2. Attach the Dust Port to the Bracket using two M6  x 10 Socket Pan Head Screws (9). M6  x 10 Socket pan Head Screw Page 12 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 13: Operation

    1. Loosen the Sanding Belt Frame Lock Nut and raise the Sanding Belt Frame to the desired vertical position/angle. 2. After positioning, wrench tighten the Lock Nut securely to prevent the Sanding Belt Frame from slipping. Item 59220 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Collection Ports for sawdust buildup that would reduce the dust collection efficiency. 4. It is recommended to wear a dust mask or respirator even when using a dust collection system. Page 14 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 15 Sanding Disc (as you face it) to sand. the tool indoors out of children's reach. The Sanding Disc turns counterclockwise and using the right side could cause kickback. Item 59220 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Maintenance

    Backing Disc and press Sanding Disc firmly onto the Backing Disc. 7. Position the Disc Guard back in place against the Disc/Pulley Housing. Replace the Screws and fasten securely. Page 16 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 17 9. When Belt tensioning is complete, reinstall the Backing Disc and Disc Guard. Drive Drive Motor Motor pulley pulley pulley pulley Motor Drive Belt Motor Motor Mount Bolts Mount Bolts Item 59220 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 2. Applying too much pressure 2. Use less pressure. while sanding. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 18 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 19 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 59220 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Parts List And Diagram

    Thread Forming Screw Nut M4 Support Bar Open End Wrench 10-13  m m Pan Head Screw M5  x   1 0 Hex Wrench 4  m m Lock Washer 5  m m Page 20 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 21 Diagram Item 59220 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175460417 when ordering parts. Page 22 For technical questions, please call 1-888-866-5797. Item 59220...
  • Page 23: Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Item 59220 For technical questions, please call 1-888-866-5797.
  • Page 24 26677 agoura road • calabasas, ca 91302 • 1-888-866-5797...