Electrical Requirements
Speed
Oscillating Range
Dust Port
Construction
Table Size
Overall Dimensions
Spindle Dimensions
Tool Weight
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
1.
keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents. Make sure there is adequate surrounding workspace.
2.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 95088
For technical questions, please call 1-800-444-3353.
PRODuCT SPECIFICATIONS
Save This Manual
GENERAL SAFETY RuLES
READ AND uNDERSTAND ALL INSTRuCTIONS
electric shock, fire, and/or serious injury.
SAVE ThESE INSTRuCTIONS
WORk AREA
120 VAC, 60 Hz, 3.5 Amps
2,000 RPM, 5/8" Stroke
58 OPM
1-1/2" OD
100% sealed ball bearing construction
14-11/32" L x 11-15/32" W
15-9/16" L x 14-1/8" W x 17" H
10 x 1.5 mm thread
33 Lb.
WARNING!
236479
Page 2