Table of Contents
Advertisement
asseMBly anD OperatiOn instructiOns
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
tO preVent seriOus injury, reaD anD unDerstanD
all warnings anD instructiOns BefOre use.
©
Copyright
1996, 2006 by Harbor Freight Tools
of this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
Belt/Disc
sanDer
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
34951
®
. All rights reserved. No portion
®
Advertisement
Table of Contents
Related Manuals for Central Machinery 34951
Summary of Contents for Central Machinery 34951
- Page 1 1996, 2006 by Harbor Freight Tools of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. for technical questions or replacement parts, please call 1-800-444-3353.
-
Page 2: Specifications
Protective, electrically non-conductive gloves and non-skid footwear are recommended when working. Wear protective hair covering to contain long hair, preventing it from getting caught in machinery. for technical questions, please call 1-800-444-3353. SKU 34951 specificatiOns Belt 1” x 30”... - Page 3 When servicing, use only identical replacement parts. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. DO nOt Operate tOOl if unDer tHe influence Of alcOHOl Or Drugs.
-
Page 4: Sanding Belt
Be cautiOus wHen sanDing wOOD tHen Metal. Combining wood dust and metal filings can create a fire hazard. Always clean away any wood dust before attempting to use the sander on metal products. Maintain a clearance Of 1/16” Or less Between tHe taBle anD tHe sanDing Belt. -
Page 5: Grounded Tools: Tools With Three Prong Plugs
Using extension cords with inadequately sized wire causes a seri- ous drop in voltage, resulting in loss of power and possible tool damage. (see table a.) for technical questions, please call 1-800-444-3353. SKU 34951 Outlets for 2-prong plug extensiOn cOrDs Page 5... - Page 6 Underwriters Laboratories, Inc. When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 7 We will refer to the tall part of the sander angled toward you as the front. The “on/off” switch is to your right. Get out the table (31), 16mm screw (36), No. 8 washer (2), locking nut (32), knob (33), spring (34), and screw (36).
-
Page 8: Adjusting Belt Tracking
For some operations, such as polishing or strapping, it’s advisable to remove the backstop entirely by unscrewing the two bolts, two washers, and the backstop itself. for technical questions, please call 1-800-444-3353. SKU 34951 use Of tHe BacKstOp Page 8... -
Page 9: Parts List
BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. for technical questions, please call 1-800-444-3353. SKU 34951 parts list Q’ty part Description 0.8 x 7 x 10 Spring... -
Page 10: Assembly Diagram
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. reV 03/98 for technical questions, please call 1-800-444-3353. SKU 34951 Page 10...