Table of Contents
Advertisement
Oscillating spindle sander
asseMbly and Operating instructiOns
read this material before using this product.
Failure to do so can result in serious injury.
saVe this Manual.
©
Copyright
1998 by Harbor Freight Tools
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
revised Manual 10c
Model
Visit our website at: http://www.harborfreight.com
®
. All rights reserved. No portion of this manual or any artwork contained
38160
Advertisement
Table of Contents
Related Manuals for Central Machinery 38160
Summary of Contents for Central Machinery 38160
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Important Safety Information
DON’T FORCE TOOL. It will do the job could result in minor or moderate better and safer at the rate for which it injury. was designed. reV 10e Page 2 For technical questions, please call 1-800-444-3353. SKU 38160... - Page 3 Don’t leave tool until it comes to a to hold work when practical. It’s safer complete stop. than using your hand and it frees both hands to operate tool. reV 10e SKU 38160 For technical questions, please call 1-800-444-3353. Page 3...
-
Page 4: Grounding Instructions
To reduce the risk of electric shock, double insulated equipment has a Use only 3-wire extension cords that polarized plug (one blade is wider than have 3-prong grounding plugs and reV 10e Page 4 For technical questions, please call 1-800-444-3353. SKU 38160... -
Page 5: Sander Safety Warnings
These carry important safety that helps the operator maintain control information. If unreadable or missing, of the workpiece and prevents the contact Harbor Freight Tools for a workpiece from being pulled into the replacement. machine. For safety, it must be adjusted very close to the sanding surface. -
Page 6: Specifications
Oscillation Travel 7/8” Sanding Belt Capacity 3/4” - 2” Sanding Belt Height 4-1/2” Sanding Thickness 3/16 - 11/16” Dust Collection Port 2” Table Tilt Angle 0 - 45° rev 00c; 10c Page 6 For technical questions, please call 1-800-444-3353. SKU 38160... - Page 7 1. Align the notch in the core board with the spring dowel (#35) located on the inner rim of the core board insert area. 2. Push down firmly until the core board is fully inserted and flush with the surface of the working table. SKU 38160 For technical questions, please call 1-800-444-3353.
-
Page 8: Preparing For Operation
Warning! Do not use water with this sander. It is for dry sanding only. Wet sanding will damage the machine, and may present a shock hazard. Use only in dry locations. reV 10c Page 8 For technical questions, please call 1-800-444-3353. SKU 38160... -
Page 9: Operation
: Inspect the power cord periodically, and if damaged, have it repaired by an authorized technician. pOWer cOrd : When servicing, use only identical replacement parts. Use of any other parts will void the replaceMent parts warranty. SKU 38160 For technical questions, please call 1-800-444-3353. Page 9... -
Page 10: Parts List
M8 bearing 61804 board of switch hexagon socket head cap nut M8 screw Mg x 16 Washer nut M8 spring Washer 8 rubber Washer Frame to Fix Motor screw Washer Page 10 For technical questions, please call 1-800-444-3353. SKU 38160... -
Page 11: Assembly Diagram
SKU 38160 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Limited 1 Year / 90 Day Warranty
1 year / 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that for a period of ninety days from date of purchase that the engine/motor, the belts (if so equipped), and the blades (if so equipped) are free of defects in materials and workmanship.