Installing The Mounting Rails - HP R5500 User Manual

Installing the mounting rails

WARNING: To reduce the risk of personal injury or damage to the equipment, be sure
that:
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if more than
one component is extended for any reason.
NOTE: Mounting hardware for square- and round-holed racks is included in the UPS kit.
Loosen the hex nuts, and extend the brackets to the desired length.
1.
Insert screws through the rack into the mounting rail and the front of each mounting bracket.
2.
Installation 13