Rena Systems Envelope Imager XT 3.0 Operation Manual page 35

4. Click on the printer icon
- Make sure the corresponding Rena Systems printer driver is selected as your "Printer:".
- Use the "Advance Settings..." button to select the desired print quality and or orientation.
- Use the features under "Print Range" to select the range of addresses you want to send to the printer.
5. Print.
When ready to print, make sure the printer is on-line, then click on the "Print" button.
Please contact Satori Software (800-357-3020) or visit the Tech Notes area of their web site for additional
information. http://www.satorisoftware.com/US/support/TechNotes.asp
Envelope Imager XT3.0/XT4.0 Operations Rev. 6/15/2007
, to open the "Mail Print Setup" dialog box.
SECTION 3
OPERATING THE PRINTER
35