Rena Systems Envelope Imager CS Driver Installation Instructions

RENA Envelope Imager CS Driver Installation Instructions

Installing the Printer Driver

Please be sure to follow the procedure as described below.

1. Place the "Driver CD", supplied with the printer, in your CD-ROM drive.

2. Connect the printer to the computer via the

port you wish to use (USB or Parallel) and

then turn the printer ON. After a little

while, the "Welcome to the Found New

Hardware wizard" will open on the

computer screen.

If prompted with "Can Windows connect

to Windows Update to search for

software?" Click on the "No, not this

time" and then click on NEXT>.

3. When prompted with "What do you want

the wizard to do?", Click on the "Install

from a list or specific location

(Advanced)" and then click on NEXT>.

4. When prompted with "Please choose your

search and installation options.", select

"Don't search. I will choose the driver to

install.". Then Click on NEXT>.

Driver Installation Instructions Rev. 6-4-07

Table of Contents

Do you have a question about the Envelope Imager CS and is the answer not in the manual?

Page 1 RENA Envelope Imager CS Driver Installation Instructions Installing the Printer Driver Please be sure to follow the procedure as described below. 1. Place the “Driver CD”, supplied with the printer, in your CD-ROM drive. 2. Connect the printer to the computer via the port you wish to use (USB or Parallel) and then turn the printer ON.
Page 2 5. When prompted to “Select a hardware type, and click Next.”, scroll down the list and select “Printers”. Then Click on NEXT>. 6. When the “Add Printer Wizard” window appears; Click on the “Have Disk…” button. 7. When the “Install From Disk” window opens;...
Page 3 Then select the file “spf800k”. Click on the “Open” button. 9. When the “Install From Disk” window appears; Click on the “OK” button. 10. The “ENVELOPE IMAGER CS” will appear in the window. Click on Next>. Driver Installation Instructions Rev. 6-4-07...
Page 4 Click on the “Finish” button. 14. The installation is complete when the “Found New Hardware” box appears in the lower right-hand corner of your screen. RENA SYSTEMS INC. 136 Green Tree Road STE 140 Oaks, PA 19456-1069 Phone: (610) 650-9170 Fax: (610) 650-9171 E-Mail: support@renausa.com...