Page 1
OUTDOOR GAS FIREPLACE USER GUIDE North America 630113 EF5000 www.escea.net...
Page 2
Any service work carried out on this appliance must only be done by a recognised escea technician or authorized personnel. The data plate for this appliance, containing technical information and specifications, can be found to the right of the control tray, near the base of the fire.
Basic Operation The EF5000 is operated by the touch control located on the Right hand side outer edge of the fascia. The basic operations possible from the touch control are ON/OFF and manual adjustment of the flame height. Before operating the fire, switch the Battery Isolating Switch on.
Page 5
Once the pilot flame has been running for 6 seconds press the FLAME UP button to release gas to the two main burners The EF5000 has 4 flame positions: PILOT flame only, LOW burner flame, MEDIUM burner flame and HIGH burner flame.
Removing the Fascia The EF5000 Stainless Steel fascia is attached to the fire by four 'hooks' on the corners of the fascia. If you need to remove the fascia, first give the fascia a brief lift upwards as shown. Now pull the fascia towards you, and rest the Fascia on the brackets...
Replacing Batteries The EF5000 uses 3x D sized batteries, To access the battery pack you will need to remove the fascia (as described on previous page). When the fascia has been removed, you will find the battery pack located in the lower middle of the fire, situated inside the control box.
Cleaning your EF5000 Do not perform any cleaning unless the fireplace has been turned off and allowed to cool for at least 30 minutes. Also the gas supply valve to the fireplace should be turned off while cleaning is in progress To clean the glass and stones in the front stone tray simply reverse the steps in section 14.0 of the Installation Manual.
ESCEA operating and maintenance instructions, then for the first period of twelve (12) months from the date of purchase ESCEA will pay to the dealer who sold the appliance, a pre-determined sum to repair or replace any part of the Product that is deemed by ESCEA to be faulty.
Need help?
Do you have a question about the EF5000 and is the answer not in the manual?
Questions and answers