Advertisement

GAS FIRE USER GUIDE
Australia
EF5000
www.escea.net
630071_1 Userguide AUS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EF5000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Escea EF5000

  • Page 1 GAS FIRE USER GUIDE Australia EF5000 www.escea.net 630071_1 Userguide AUS...
  • Page 2 Any service work carried out on this appliance must only be done by a recognised escea technician or authorised personnel. The data plate for this appliance, containing technical information and specifications, can be found to the right of the control tray, near the base of the fire.
  • Page 3 Contents Basic Operation 1 - 4 Removing the Fascia Cleaning and Maintenance Warranty Information...
  • Page 4: Basic Operation

    Basic Operation The EF5000 is operated by the switch located on the right hand side outer edge of the fascia. The basic operations possible are ON/OFF. Before operating the fire, ensure the power transformer is plugged into the mains wall socket & turned on, and the supply is turned on.
  • Page 5 Basic Operation...
  • Page 6 Removing the Fascia The EF5000 Stainless Steel fascia is attached to the fire by four 'hooks' on the corners of the fascia. If you need to remove the fascia, first give the fascia a brief lift upwards as shown. Now slide the fascia towards you until it falls into the additional slot, unplug the electrical cord .NowyoucanresttheFasciaontheground.
  • Page 7 Cleaning your EF5000 To clean the glass and stones in the front stone tray simply reverse the steps in section 14.0 of the Installation Manual. The glass can be cleaned using standard window cleaner. The quartz stones can be washed using soapy water If the stainless steel fascia requires cleaning the following products are recommended;...
  • Page 8 ESCEA operating and maintenance instructions, then for the first period of 12 months from the date of purchase ESCEA will pay the cost of repairing or replacing any part of the Product that is deemed by ESCEA to be faulty.

Table of Contents