Purpose - Bosch FPA-5000 User Manual

4 en | Purpose
1

Purpose

This document contains information on accessing and controlling FPA-5000 networks via OPC
using the FSM-5000-OPC server. It is designed to aid in successfully configuring the FPA-5000
network and the corresponding FSM-5000-OPC server to enable communication between the
two via a single or redundant Ethernet connection. In completing these steps successfully a
functional interface is provided for a subsequent connection to BIS 2.x which functions as
OPC client.
Notice!
Setting up and configuring an FPA-5000 network controlled by an OPC server requires basic
IT knowledge.
The information refers to FSM-5000-OPC Version 1.1.11 and later and supported FPA-5000
software.
RSN 001
Figure 1.1: FPA-5000 network controlled by an OPC server with single Ethernet connection
2013/05 | 2.0 | F.01U.261.550
Cat. 5
Ethernet
CAN
RSN 003
User Guide
192.168.1.2
255.255.255.0
Cat. 5
RSN 002
RSN 003
FPA-5000 OPC-Server
FPA_OPC
RSN 004
Bosch Sicherheitssysteme GmbH