Configuring Wpa/Wpa2 Personal - D-Link DCH-M225 User Manual

Wi-fi audio extender

Hide thumbs Also See for DCH-M225:

Table of Contents

Section 3 - Configuration

Configuring WPA/WPA2 Personal

If you did not enable wireless security during initial setup, it is recommended that you do so using the web-based configuration

utility. Establish wireless connectivity before enabling wireless security. For more information about security, refer to

Security Options" on page

1. Log into the web-based configuration by opening a web browser

and entering http://dlinkap.local./.

2. Simply click Log In. (The Admin Password is blank by default.)

Note: If you did not create a password, it should be left blank.

3. The configuration interface will open to the Home page. Click on

the Settings drop-down menu and select Wi-Fi. Then configure

the Wi-Fi network you would like your DCH-M225 to connect to.

D-Link DCH-M225 User Manual

54. If you prefer WPS, proceed to

"Connecting to Wireless Clients Using WPS" on page

"Wireless

36.

Table of Contents