If The Scsi Hard Disk Stops Working; If You Lose The Key - HP Vectra VE 5/series 2 User Manual

• Format Disk
This utility can be used to perform a low-level format of a hard disk. Most SCSI disks are
preformatted and do not need low-level formatting.
• Verify Disk Media
This utility scans for media defects on the selected SCSI device. Press the [ESC] key to
abort this utility.

IF THE SCSI HARD DISK STOPS WORKING

If the SCSI subsystem has been operating properly for a reasonable length of time, and if no
specific errors appear on the display, the problem may be due to equipment failure. The
problem may also be due to some recent change you have made to the system.
1 If you have made recent changes to the software, such as changes to configuration files or
drivers, this could cause the problem. Refer to the software documentation for more
information.
2 If you have installed a board, ensure there is not a resource conflict between the new
board you have added and existing boards. If you have changed the options on an existing
board there may be a resource conflict:
a Remove the new board and restart the computer. If this corrects the problem, the
board is either defective, or it is trying to use a system resource used by the SCSI
subsystem. Change the board's settings as needed.
b Check that the new board is not using memory, I/O addresses, an IRQ, or DMA also
used by the SCSI subsystem. Refer to the board's and SCSI subsystem manuals for
more information.
3 Check the SCSI cable for problems that may have been caused by recent computer
maintenance, hardware upgrades, or physical damage.
4 If you suspect hardware failure and there are no system error messages, check each
component associated with the failure. Equipment failure, however, is the most unlikely
reason for a SCSI subsystem failure.

IF YOU LOSE THE KEY

If you lose the key to the PC, you need to order a replacement lock (HP part number 5062-
5590) from the HP dealer or HP Sales and Service Office. The new lock is delivered with two
keys. Contact your HP dealer for installing the new lock.