Installing An Optional Optical Drive - Sff Chassis - HP COMPAQ DX2710 MT Service & Reference Manual

Removing the Optical Drive or Diskette Drive
To replace the drive, reverse the removal procedures.
✎
When replacing the drive, transfer the four screws from the old drive to the new one. The screws
take the place of drive rails.

6.8.5 Installing an Optional Optical Drive - SFF chassis

To install an optional optical drive:
1. Remove the optical drive if present.
2. Install the guide screws as indicated.
Ä
CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the
internal components of the drive.
Service Reference Guide
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
483941-001 6–23