HP COMPAQ DX2710 MT Service & Reference Manual page 14

Setup Utilities and Diagnostics Features
Computer Setup (Continued)
Heading
Advanced
BIOS Features
(continued)
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
2–6
Option
Removeable Device Priority
Hard Disk Boot Priority
CD-ROM Boot Priority
Network Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Boot Other Device
Load Boot Menu Selectable
APIC Mode
Hyper-Threading Technology
System Keyboard
Boot Up NumLock Status
Security Option
483941-001
Description
Allow you to select FDD or USB-FDD as the
first removeable device.
Allows you to specify the order of attached
hard drive devices (such as USB HDD
storage, USB2 Drive Key, or USB flash
media, IDE HDD, SATA HDD or bootable
add-in cards). The first drive in the order has
priority in the boot sequence and is
recognized as drive C (if any devices are
attached).
Allows you to specify the order of attached
optical drive device.
Allows you to specify the order of network
device.
Allows you to specify which devices will boot
first, second, and third, or to disable any of
the three:
• Removable
• Hard Disk
• CD-ROM
• Network
• Disabled
✎
MS-DOS drive lettering assignments
may not apply after a non-MS-DOS
operating system has started.
Disables/enables boot other device.
Disables/enables boot menu selectable
Disables/enables the APIC mode.
Modifiable when Hyper-Threading
Technology is DISABLED.
Disable/ enables Hyper-Threading
technology. This item will show when the
CPU supports Hyper-Threading technology.
Allows you to set system keyboard to absent
or present.
Allows you to set the default NumLock status
to off or on.
Allows you to set the security option to Setup
or System so that the password is required
every time the system boots or only when
entering Computer Setup.
Service Reference Guide