System Fan - HP COMPAQ DX2710 MT Service & Reference Manual

6.10 System Fan

1. Prepare the computer for disassembly
2. Remove the access panel
(MT chassis and SFF
3. Disconnect the cable that connects the system fan to the system board.
4. Remove the four screws that secure the fan to the chassis and remove the fan.
To install the fan, reverse the removal procedures.
Note: Similar installtion procedure is lying on SFF for System Fan.
Service Reference Guide
Removal and Replacement Procedures— Microtower (MT)/Small Form Factor (SFF) Chassis
(Section 6.2, "Remove the computer access panel and front bezel
chassis)").
483941-001
(Section 6.1, "Preparation for Disassembly").
6–29