Replacing The Power Take-Off Belts - Husqvarna PT 26D Operator's Manual

WARNING:
If the blades are cracked, whether caused by poor
repair or other damage, they could break while being
used. Cracked and defective blades must always be
replaced. The risk increases if the blades are poorly
balanced.

Replacing the power take-off belts

Always replace the belts in pairs.
1. Remove the driver's seat.
2. Remove the protective cover above the hydraulic
pump's drive shaft.
3. Remove the ignition keys from the machine.
4. Release (1) the drive shaft from the hydraulic
pump and remove the spacer ring (2) from the
coupling.
1
Drive shaft spacer ring
Maintenance
2
105