Fcc Part 68 Telecom - Multitech MT9234ZBA-USB-CDC-XR User Manual

FCC Part 68 Telecom

This equipment complies with Part 68 of the 47 CFR rules and the requirements adopted by the ACTA. Located on this
1.
equipment is a label that contains, among other information, the registration number and Ringer Equivalence Number
(REN) for this equipment or a product identifier in the format:
For current products: US:AAAEQ##Txxxx.
For legacy products: AU7USA-xxxxx-xx-x.
If requested, this number must be provided to the telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
2.
applicable 47 CFR Part 68 rules and requirements adopted by the ACTA. It's designed to be connected to a compatible
modular jack that is also compliant.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone
3.
line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after
July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##Txxxx. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
4.
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
5.
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact Multi-Tech Systems, Inc. at the address shown below for
6.
details of how to have the repairs made. If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
7.
commission or corporation commission for information.
No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees. Unauthorized
8.
repairs void registration and warranty.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
9.
equipment does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service
10.
commission or corporation commission for information.
This equipment is hearing aid compatible.
11.
Manufacturing Information on telecommunications device (modem):
12.
Manufacturer:
Trade Name:
Model Number:
FCC Registration Number:
Ren:
Modular Jack (USOC):
22
MultiTech Systems, Inc.
®
MultiModem ZBA
MT9234ZBA-USB-CDC-XR
US:AU7MM01BMT9234SMI
0.1B
RJ11
Service Center in USA:
MT9234ZBA-USB-CDC-XR User Guide
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
(763) 785-3500
Fax (763) 785-9874