Table of Contents
Advertisement
FCC Part 68 Telecom
This equipment complies with part 68 of the Federal Communications Commission Rules. On the outside surface of this
1.
equipment is a label that contains, among other information, the FCC registration number. This information must be
provided to the telephone company.
The suitable USOC jack (Universal Service Order Code connecting arrangement) for this equipment is shown below. If
2.
applicable, the facility interface codes (FIC) and service order codes (SOC) are shown.
An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be
3.
connected to the telephone network or premises wiring using a compatible modular jack that is Part 68 compliant. See
installation instructions for details.
The ringer equivalence number (REN) is used to determine the number of devices that may be connected to the
4.
telephone line. Excessive RENs on the telephone line may result in the device not ringing in response to an incoming call.
In most, but not all, areas the sum of the RENs should not exceed 5.0. To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the local telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
5.
temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will
notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the
6.
operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to
make necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment (the model of which is indicated below) please contact Multi-Tech Systems,
7.
Inc. at the address shown below for details of how to have repairs made. If the trouble is causing harm to the telephone
network, the telephone company may request you remove the equipment from the network until the problem is
resolved.
No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees. Unauthorized
8.
repairs void registration and warranty.
This equipment should not be used on party lines or coin lines.
9.
If so required, this equipment is hearing aid compatible.
10.
This product is labeled with the following information:
11.
Manufacturer:
Trade Name:
Model Number:
FCC Registration Number:
Ren:
Modular Jack (USOC):
Service Center in USA:
MT9234ZBA-USB User Guide
MultiTech Systems, Inc.
®
MultiModem
ZBA
MT9234ZBA-USB
US:AU7MM01BMT9234SMI
0.1B
RJ11
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112
(763) 785-3500 Fax (763) 785-9874
24
Advertisement
Table of Contents
