Alarm Sending - Planet ICA-700 User Manual

5.2.2 Alarm sending

This page will be displayed after clicking "Advance > SMTP > Alarm sending" of the
setting menu. It allows you to send the image via SMTP with the alarm detection.
On / Off
File attachment
Image file name
Suffix
Dual Mode CCD Dome Internet Camera
Alarm sending
Enable/disable the Alarm sending function.
Set whether an image file is attached to the mail sent or not.
When On is selected, the image file made by the settings below is
attached. When Off is selected, only the message is sent.
Type the file name you want to assign to the images when sending to the
FTP server. You can use up to 10 alphanumeric characters, - (hyphen)
and _ (underscore) for naming.
Select a suffix to add to the file name:
None:
No suffix is added. The Image file name is assigned to the image to be
sent via an e-Mail.
Date & time:
The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2
digits), hour (2 digits), minute (2 digits), second (2 digits), and consecutive
number (2 digits), thus 14-digit number is added to the file name.
Sequence number:
A consecutive number of 10 digits between 0000000001 and 4294967295
and two fixed digits 00 is added to the Image file name.
57