Alarm - Planet ICA-4130S User Manual

want to send the alarm message to an FTP server, it will need to configure parameters
here and also add at least one event schedule to enable event triggering as SMTP.
Parameter
Server Address
Server Port
User Name
Password
FTP Folder Name
Test

3.6.6 Alarm

Parameter
Enable Alarm
Motion Detection
Type the server name or the IP address of the FTP server
Set port number of FTP service
Type the user name for the FTP server
Type the password for the FTP server
Set working directory path of FTP server, eg. VOLUME2/PLANET
Check the FTP server whether this account is available or not
Start or stop using Alarm
Trigger alarm when any movement is detected in motion detection
monitored area. The image is divided into 4 x 3 areas, and you can
select your preferred areas. Set Motion Region and Schedule
Settings will enable when the Motion Detection is checked. The
provided sensitivity levels of Motion Settings are low, medium and
31
Ultra-mini SIP PoE IP Camera
ICA-4130S/ICA-4230S
Description
Description