Planet ICA-700 User Manual page 45

POP server name:
It is necessary when
Type the POP (receiving mail) server name up to 64 characters, or type the
IP address of the POP server. This setting is necessary when the SMTP
server which sends e-mails performs authentication using the POP user
account.
User nam
Type the user name and Pa
This setting is necessary when the SMTP server which sends e-mails
performs authentication.
Recipient Type the recipient e-Mail
to three recipient E-mail addresses.
e-mail add ress
Administrator Type the Administrator e-Mail addres
used for reply mail and sending system messages from the SMTP server.
e-mail address
Type the subject/title of the e-Mail up to 64 characters. With respect to mail
Subject
which is sent according to the IP notification.
Type the text of the E-mail up to 384 characte
Message
network information including IP, Port, MAC, Model and Serial..
Note:
When you set Authentication to On, be sure to select either or both SMTP or/and POP before
SMTP.
Dual Mode CCD Dome Internet Camera
the POP before SMTP is selected in Authentication.
e & Password:
ssword of the user who has the mail account.
address up to 64 characters. You can specify up
s up to 64 characters. This address is
rs. Default value provide
45