5.3.2 Alarm sending
This page will be displayed after clicking "Advance > HTTP event > Alarm sending" of
the setting menu. It allows you to send the image or video to HTTP server with the alarm
detection.
On / Off
Motion detection
Parameter
Message
User alarm buffer
Parameter
Message
62
Alarm sending
Enable/disable the alarm sending function.
Alarm
Click it on for using Motion Detection function as a sensor. You can set
the motion detection function page.
Select Use alarm buffer when you forward the image/audio of before
and after the alarm detection (pre-alarm, post-alarm). If you do not
select it, only the image of the moment of the alarm detection is
forwarded. Click Alarm buffer to display the Alarm buffer setting menu.
ICA-700 User Guide