Initialize - Planet ICA-700 User Manual

4.1.3 Initialize

T his page will be displayed after clicking "Basic > System > Initialize" of the setting menu.
It allows you to maintain the system of this IP camera.
Reboot
Factory default
Backup setting data
Restore setting
Firmware upgrade
Dual Mode CCD Dome Internet Camera
Initialize
Click this button to reboot th
appear. Click OK to proceed.
Click this button to reset the de
confirmation dialogue will appear. Click OK to proceed. After
completing adjustments to the default settings, the device will
automatically. Do not turn off the device until the device reboots.
Save the setting data of the device to a file. Click Save and follow
instructions on the browser to save the setting data file to your
specified location.
Load the saved set ting data of the device. Click Browse and select
the file in which the setting data is stored. Click OK, and the device is
adjusted according to the loaded data and restarted.
Upgrade the device software. Click Browse and selec
upgrading. A confirmation dialogue will appear. Click OK to start
upgrading. The device will reboot upon completion.
e device. A confirmation dialogue will
vice to the factory default settings. A
reboot
the
t the file for
31