Table of Contents
Advertisement
About the controls on the air conditioner.
LOW
FAN
HIGH
FAN
Controls
Mode Control
HIGH COOL, MED COOL and LOW COOL provide
cooling with different fan speeds.
LOW FAN or HIGH FAN provides air circulation
and filtering without cooling.
ENERGY SAVER is recommended for cost
savings. The fan and compressor stop
together when the room temperature reaches
the thermostat setting. It will turn on again as
the room temperature rises.
NOTE: If you move the switch from a cool setting to OFF or to
a fan setting, wait at least 3 minutes before switching back to
a cool setting.
Cooling Descriptions
For Normal Cooling —Select HIGH COOL or MED
COOL with the temp control at 5 or 6 .
For Maximum Cooling —Select HIGH COOL with the
temp control at 10 .
For Quieter & Nighttime Cooling —Select LOW COOL
with the temp control at 3 or 4 .
4
OFF
LOW
COOL
MED
COOL
HIGH
COOL
ENERGY
SAVER
MODE CONTROL
5
6
4
3
2
1
10
TEMP CONTROL
Temp Control
The temp control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to a
higher number the indoor air will become
cooler. Turn the knob to a lower number and
the indoor air will become warmer.
7
8
9
Advertisement
Table of Contents
