GE AMH10 Owner's Manual & Installation Instructions page 12

Window Installation Instructions
8
Install the Window Locking Bracket and the Foam Top Window Gasket
Attach the window locking bracket with a
A
type A screw.
9
Install the Air Conditioner in the Case
Slide the air conditioner into the case. Do not
A
push on the controls or the finned coils. Make
sure the air conditioner is firmly seated toward
the rear of the case.
Reinstall the locking bracket and screw
B
removed earlier.
12
Cut the foam top window gasket to the window
B
width.
Stuff the foam between the glass and the
C
window to prevent air and insects from getting
into the room.
Reinstall the grounding screw removed earlier.
C
Depending on the location of the AC outlet,
D
route the cord to either the left or the right side
of the air conditioner. Replace the front grille
by pushing it in at the bottom until it snaps into
place. Replace the 2 screws and the control
knobs.