Setting The Auxiliary Controls - GE Zoneline AZ9VH Owner's Manual And Installation Instructions

Setting the auxiliary control
Auxiliary Controls – Aux Set Button
differences in installation parameters or personal preferences on how the unit should operate and perform.
auxiliary set button.
Modes of the Auxiliary Control
ON Fan
While in AUX Mode, press the MODE button to scroll through the different modes. Continue the press the MODE
button until the number corresponding to the mode to be modified is showing in the first digit of the display. Once
the correct number is displayed, use the +/- buttons to change the second digit of the display for that mode to
either " for On OR "
When the selection for a given mode is complete, press the MODE button to continue setting other auxiliary
control functions OR press the AUX SET button to confirm the selection and exit AUX SET mode.
Mode 1 Smart Fan—Cooling/Heating
MODE
display for Smart Fan
Fan heat mode, press MODE again.
AUX to confirm your selection and exit AUX mode,
or press MODE to continue setting other functions.
*Note:
heating mode, the fan will continue to operate for several
seconds after the heating function has stopped in order to
increase unit efficiency.
49-5000640 Rev. 2
+
Mode
" appears on the display.
-
Aux
Set
AUX Mode :
Aux
Set
Mode
Auxiliary Set Mode
" for Off depending on the desired function.
Mode 7 – Fan Boost Mode
Mode E – Makeup Air Occupancy
Mode d – Dehumidification
+
-
"most" customers
25