Controls; Remote Control - GE AWES06 Owner's Manual

Controls

Features and appearance will vary.
Lights below the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
Controls
1. LED Display
Shows the set temperature of time remaining on the
Delay timer. Shows the set temperature while setting
the temperature in Cool or Eco modes.
2. Fan Speed Pad
Cool or Eco mode
Med, Low, or Auto.
Fan mode
Low.
3. Increase + / Decrease – Pads
4. Timer Pad
Timer ON – When the air conditioner is off, it can be
set to automatically come in 0.5 to 24 hours.
How to set:
Press the Timer
+/– pads to set the temperature, then press the Timer
+/– pads to set the timer in 0.5
hour (under 10 hours) or 1 hour (10 hours or more)
intervals and press the Timer pad for a third time
to set the timer. Once the timer is set pressing the
Timer pad will cancel the timer.
Timer OFF – When the air conditioner is on, it can be
set to automatically turn off in 0.5 to 24 hours.
How to set:
Press the Timer
+/– pads to set the timer in 0.5 hour (under 10 hours)
or 1 hour (10 hours or more) intervals and press the
Timer pad again to set the timer. Once the timer is
set pressing the Timer pad will cancel the timer.
49-5000869 Rev. 0
5. Filter Pad
This feature automatically notifies you that the air filter
must be cleaned. The indicator light will come on after
500 hours of operation. Clean the air filter (page 8),
place it back in the front panel, and press the Filter
pad. The light will go off.
High,
6. Power Pad
Turns air conditioner on and off. When turned on, the
High, Med, or
display will show the set temperature.
7. Mode Pad
Auto Mode.
8. Sleep Pad
Sleep mode automatically adjusts the temperature set
point over time and returns to previous settings after
8 hours. Pressing the Sleep pad again will exit sleep
mode.
9. Eco Pad
10. Display Pad
Pressing the Display pad on the remote will switch all
lights on the LED display on/off.

Remote Control

Cool, Dry, Fan, or
Eco mode.
5