Recording The Location Information - JVC GC-PX100 Detailed User Manual

Recording the Location Information

You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
Memo :
To obtain the location information, it is necessary to connect the
0
smartphone to the camera and start the smartphone application.
Also, setting the "LOC INFO TRANS INT" for the smartphone application
is necessary.
"Smartphone Application Settings" (A p. 136)
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
0
with this unit.
What You Need
Smartphone
0
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the "Wi-Fi Protected Setup
(WPS)".
*WPS is a method to connect the camera and the smartphone wirelessly by
easy button operations.
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
4
Tap "START" (I).
(Operation on this camera)
5
Check the SSID and the PASS being displayed on the screen of the
camera.
6
Select the SSID in step 5 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone (or computer))
For details on connecting your smartphone (or computer) to a Wi-Fi
0
network, please refer to the instruction manual of the phone terminal
in use.
7
A connection is established and Q appears on the camera's screen.
Connection by Wi-Fi Protected Setup (WPS)
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
Using Wi-Fi
101