JVC GC-PX100 Detailed User Manual page 153

Read a QR code.
1
Read a QR code.
(Operation on this camera)
2
Tap "YES".
3
Tap "OK".
Tap "NEXT" to return to the screen to read the QR code.
0
Set contents are saved.
0
Registering the access points (wireless LAN router) to this
unit
Wi-Fi Protected Setup (WPS) Registration
o
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
Using Wi-Fi by Creating a QR Code
4
Tap "ACCESS POINTS".
(Operation on this camera)
5
Tap "ADD".
(Operation on this camera)
6
Tap "EZ REGISTRATION WPS".
(Operation on this camera)
7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
8
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
153