Setting The Password (Direct Monitoring/Indoor Monitoring/Outdoor Monitoring) - JVC GC-PX100 Detailed User Manual

Using Wi-Fi
Setting the Password (DIRECT MONITORING/INDOOR
MONITORING/OUTDOOR MONITORING)
Sets the password required to access the camera.
Up to 8 characters (alphabets, numbers and symbols only), case-
0
sensitive.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "DIRECT MONITORING" (N), "INDOOR MONITORING" (O) or
"OUTDOOR MONITORING" (M).
(Operation on this camera)
4
Tap "PASSWORD".
(Operation on this camera)
5
Register a password.
(Operation on this camera)
By default, the password is set to "0000". (INDOOR MONITORING/
0
OUTDOOR MONITORING)
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
106
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
6
Tap "SET".
(Operation on this camera)
Settings will not be saved until "SET" is tapped.
0