Getting Started; Attaching The Accessories - JVC GC-PX100 Detailed User Manual

Attaching the Accessories

Attaching the Shoulder Strap
A Insert the tip of shoulder strap into the attachment part of this unit (A).
B Insert the shoulder strap into the ring (B).
C Adjust the length of the belt, and then fix with the strap lock (C).
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is used by children.
0
Attaching the Lens Cap
Attach the lens cap when this unit is not used or during transportation.
Attach the lens cap to the grip belt while recording is in progress.
Attaching the Lens Hood
Use of the lens hood is recommended for shooting outdoors with exposure
to direct sunlight.
Align the indicators (c mark) of lens hood and this unit, and attach the lens
hood by rotating it.
Caution :
Remove the lens hood when flash and/or light are used.
0
Vignetting (the screen getting dark, or appearance of shadow) may occur.
Attaching the Monitor Hood
Attach the monitor hood if the monitor screen is difficult to see due to the
sunlight.
Attach the claw located at the upper part of the monitor hood to insertion
point at the upper part of the LCD monitor. Then attach the claw at the bottom
part of the monitor hood.
Attaching the Viewfinder
Attach the viewfinder for shooting in a bright area, such as outdoors, if the
monitor screen is difficult to see.
Attach a viewfinder after removing the viewfinder terminal cover.
Caution :
Attach or remove the viewfinder after turning off the power of the main unit.
0
Memo :
By pressing the Monitor Switch button located on the side of the
0
viewfinder, monitor display is switched between the LCD monitor and the
viewfinder.
Make adjustments with the diopter adjustment dial if images displayed on
0
viewfinder is difficult to see.
Attach a viewfinder (sold separately).
0
This may not be commercially available in some regions.
0

Getting Started

11