Changing The Settings - JVC GC-PX100 Detailed User Manual

To change the time interval for obtaining the GPS location information
0
(OFF-15 sec.), tap Q.
"Smartphone Application Settings" (A p. 136)
5
Receiving the location information
(Display on this camera)
When the GPS location information is received from the smartphone,
0
an icon (Z) is displayed on the camera screen.
6
Start recording.
(Operation on this camera)
Press the "START/STOP" button to start a normal recording.
0
Memo :
Manual recording cannot be performed.
0
It is not possible to switch to the playback mode.
0
Videos are recorded in AVCHD mode. Videos cannot be recorded in MP4/
0
MOV mode.

Changing the Settings

To use the Wi-Fi function, it may be necessary to perform some settings on
the camera and smartphone (or computer).
Registering the access points to connect (wireless LAN router)
0
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 115)
Obtaining a dynamic DNS account
0
"Obtaining a Dynamic DNS (DDNS) Account" (A p. 109)
Setting the account on this camera
0
"Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)"
(A p. 109)
Setting the sender's e-mail address
0
"Setting the Sender's E-mail Address of the Camera" (A p. 110)
Registering the recipient's e-mail address
0
"Registering the Recipient's E-mail Address of the Camera" (A p. 113)
Using Wi-Fi
103