Dubbing Files To A Vhs Tape By Connecting To A Vcr - JVC GC-PX100 Detailed User Manual

Copying
Memo :
AV cable (P/N: QAM1322-001)
0
Wiring specifications (for video/audio) of the 4-pole mini plug are described
in the following.
For purchasing, consult your nearest JVC service center.
Memo :
To include the recording date and time during dubbing, set "DISPLAY
0
DATE/TIME" in the "PLAYBACK SETTING" menu to "ON". Or, set
"DISPLAY ON TV" in the "CONNECTION SETTINGS" menu to "ON".
74
Dubbing Files to a VHS Tape by Connecting
to a VCR
You can dub videos in standard quality by connecting to a VCR.
Refer also to the instruction manuals of the TV and VCR.
0
1
Remove the AC adapter and battery pack from this unit.
2
Connect to a VCR/DVD recorder.
A Connect using the provided AV cable.
B Connect the AC adapter to this unit.
Be sure to use the supplied AC adapter.
0
3
Turn on the power.
4
Press the L button to select the playback mode.
Check if the playback mode is A.
0
If the mode is B still image, tap B on the playback screen to display
0
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
5
Prepare the TV/VCR for recording.
Switch to a compatible external input.
0
Insert a video tape.
0
6
Prepare this unit for playback.
Set "VIDEO OUTPUT" in the "CONNECTION SETTINGS" menu to
0
the aspect ratio ("4:3" or "16:9") of the connecting TV.
" VIDEO OUTPUT " (A p. 185)
7
Start recording.
Start playback on this unit and press the record button on the
0
recorder.
"Playing Back Videos" (A p. 52)
After playback is complete, stop the recording.
0