Recording The Location Information - JVC Everio R GZ-RX670 Detailed User Manual

Using Wi-Fi

Recording the Location Information

You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
Memo :
To obtain the location information, it is necessary to connect the
0
smartphone to the camera and run the smartphone application.
It is also necessary to set the "LOCATION INFORMATION SETTING" of
the smartphone application.
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
0
with this unit.
What You Need
Smartphone
0
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the "Wi-Fi Protected Setup
(WPS)".
*WPS is a method to connect the camera and the smartphone wirelessly by
easy button operations.
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
≪PLAY
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
TOP MENU
Wi-Fi
OFF
SETUP
.
124
GPS
REC MENU
RECORD
SETTING
CONNECTION
SETTINGS
3
Tap the "DIRECT CONNECTION" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
Wi-Fi
DIRECT
CONNECTION
.
When "60p" is selected for "SYSTEM SELECT", the following display
0
appears and recording mode is switched to 60i mode.
DIRECT CONNECTION
VIDEO RECORDING AT 60i
WHEN USING Wi-Fi
.
4
Check the SSID and the PASS being displayed on the screen of the
camera.
DIRECT CONNECTION
SET UP Wi-Fi SETTING ON
CONNECTING DEVICE
SSID:********************************
PASS:********************************
.
5
Select the SSID in step 4 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone)
.
For details on connecting your smartphone to a Wi-Fi network, please
0
refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera's screen.
DIRECT MONITORING
.
Connection by Wi-Fi Protected Setup (WPS)
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
ACCESS POINT
CONNECTION
Wi-Fi SETTING
OK
WPS
0:00:00 [2:04] 0:00:00 [2:04]
STOP
REC