Recording The Location Information - JVC GZ-RX515 Detailed User Manual

Using Wi-Fi
3
Log in with your username and password.
(if authentication cannot be achieved)
.
The username is "everio" and the default password is "0000".
0
To change the password, it is necessary to generate a QR code.
0
"Creating a QR Code" (A p. 122)
4
The recording screen is displayed.
.
How to operate from a smartphone
0
"Using Smartphone Applications" (A p. 102)
94

Recording the Location Information

You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
Memo :
To obtain the location information, it is necessary to connect the
0
smartphone to the camera and start the smartphone application.
Also, setting the "LOC INFO TRANS INT" for the smartphone application
is necessary.
"Smartphone Application Settings" (A p. 111)
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
0
with this unit.
What You Need
Smartphone
0
Settings Required in Advance
Set up your camera and smartphone by performing the following operations.
For a smartphone with WPS support, refer to the "Wi-Fi Protected Setup
(WPS)".
*WPS is a method to connect the camera and the smartphone wirelessly by
easy button operations.
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.