Checking For Open Zones
Using the
– 28 –
Technical Manuals Online! - http://www.tech-man.com
READY Key
Before arming your system, all protected doors, windows and other
protection zones must be closed or bypassed (see BYPASSING
section). Otherwise the keypad will display a "Not Ready" message.
Using the READY key will display all zones that are faulted, making
it easier for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
TO SHOW FAULTS
1. Do not enter security code, but simply press
FAULT 005 FRONT
UPSTAIRS BEDROOM
2.
DISARMED
READY TO ARM
Note: Some keypads light a green LED
when the system is ready. If not lit, the
system is not ready to be armed.
READY
Typical fault display
Secure or bypass the zones displayed
before arming the system. The "Ready"
message will be displayed † when all
protection zones have been either closed or
bypassed.
† NOTE: All or part of this message may
be replaced by a customized message
programmed by the installer. Bear this in
mind whenever the instructions indicate
that the "DISARMED" or "READY"
message will be displayed.
.