Checking For Open Zones - First Alert FA162C User Manual

CHECKING FOR OPEN ZONES

Before arming your system, all protected doors, windows and other protection zones must be
Using the
closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not
READY Key
Ready" message. Using the READY key will display all zones that are faulted, making it easier
for you to secure any open zones.
To show faulted zones:
DISARMED - PRESS
TO SHOW FAULTS
READY
1.
2.
F AULT 05 F RONT
UPST AIRS BE DROOM
* * * DISARME D * * *
3.
RE ADY T O ARM
Note: Keypads light a green READY indicator when system
is ready. If not lit, the system is not ready to be armed.
PRESS THE READY KEY
Do not enter the security code, but simply press the READY
key.
SECURE FAULTED ZONES
Typical fault display shows open zones. Secure or bypass
the zones displayed before arming the system.
SYSTEM CAN BE ARMED
The "Ready" message will be displayed when all protection
zones have been either closed or bypassed.
You may now arm the system as usual.
– 14 –