Installing A Non-Hot-Plug Expansion Board - HP ProLiant DL380 Generation 4 User Manual

Remove the expansion slot cover.
4.
To replace the component, reverse the removal procedure.

Installing a non-hot-plug expansion board

Power down the server (on page 27).
1.
Extend the server from the rack, if applicable
2.
Remove the access panel
3.
Remove the PCI riser cage
4.
CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the PCI riser cage.
Remove the expansion slot cover for expansion slot 1
5.
58).
Unlock the PCI retaining clip.
6.
("Extend the server from the
("Removing the access panel" on page 29).
("Removing the PCI riser
rack" on page 28).
cage" on page 57).
("Removing expansion slot cover
Hardware options installation 60
1" on page