Power Trim/Tilt Switch; (Remote Control Lever); (Control Box Console) - Honda BF75A Owner's Manual

3. CONTROLS (REMOTE CONTROL TYPE)
Power Trim/Tilt Switch
(remote control lever)
Power fiim
Press the power trim/tilt switch on the
remote control lever to adjust the
motor trim angle from 0" to 20" to main-
tain proper boat trim. The power
trim/tilt switch located on the remote
control lever can be operated while the
boat is under way or while stopped.
By
using the power trim/tilt switch, the
operator can change the trim angle of
the motor to achieve maximum boat
acceleration, speed, stability and
maintain optimum fuel consumption.
Power Tilt
Press the power trim/tilt switch on the
remote control lever to
asjust the
motor tilt angle from 2O"to 72".
By using the power trim/tilt switch, the
operator can change the tilt angle of
the motor for shallow water operation,
beaching, launching from a trailer, or
mooring.
38
SINGLE TYPE
CONTROL
LEVER
DUAL
1 NOTICE]
Excessive trim/tilt angle during
operation can cause the propeller
to raise out of the water and cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
pump-
Power Trim/Tilt Switch
(control box console)
LEFT INDIVIDUAL ADJUSTMENT
RIGHT INDIVIDUAL'ADJUSTMENT
The right and left outboard motors can
be adjusted separately with the switch
on the console side.