Using The Auto Aspect Ratio Feature; Selecting The Cinema Mode (480I And 1080I Signals) - Toshiba 26HL47 Owner's Manual

4:3 letter box TheaterWide 2
To turn on the auto aspect ratio feature:
4
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press@.
To set the Cinema Mode to Film:
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO 1, VIDEO 2, ColorStream
HD-1, ColorStream HD-2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode
to
Film.
1 Press M~U and open the Video menu.
2
Highlight Theater Settings and press
8.
3
In the Cinema Mode field, select Film.
Selecting the cinema mode
(48Di and 1D8Di signals)
Full
The current picture size you set under
"Selecting the picture size" on page 39.
Not defined
(no ill-I data
orHDMI
aspect data)
16:9 full
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
When the auto aspect ratio feature is set to On, the TV will
automatically select the picture size when one of the following
input sources is received:
• A 480i signal from the VIDEO 1, VIDEO 2, ColorStream
HD-1, or ColorStream HD-2 input.
• A 480i, 480p, nop, I080i, I080p, or VGA signal from the
HDMI input.
--...-.,...,.....,--..,.....,..,.....,.."",..
.fAU
,-
4:3 normal Natural (with sidebars)
Using the auto aspect ratio feature
1 Press M~U and open the Video menu.
2
Highlight Theater Settings and press
8.
3
In the Auto Aspect Ratio field, select On.
To set the Cinema Mode to Video:
Select Video in step 3 above.
4
To save the new settings, highlight Done and press
8.
To revert to the factory defaults, highlight Reset and
press
8.
To turn off the auto aspect ratio feature:
Select
Off
in step 3 above.
41 I