Using The Static Gamma Feature; Using The Auto Aspect Ratio Feature - Toshiba 26AV500U Owner's Manual

Using the static gamma feature Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
• A 480i signal from the VIDEO 1, VIDEO 2 input.
• A 480i, 480p,
nop,
1080i signal from the HDMI input.
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
1
Press
M3' U
and open the
Video
menu.
2
Highlight
Advanced Picture
and press ~ or
@.
3
Highlight
Auto Aspect Ratio
and press
~
or
@
to
select On or Off.
The static gamma feature allows you to adjust the levels of
black in the picture.
To adjust the static gamma settings:
1
Press
M3' U
and open the
Video
menu.
2
Highlight
Advanced Picture
and press ~ or
@.
3
Highlight
Static Gamma
and press
@,
a new
adjustment bar will appear as below.
4
In the
Static Gamma
field, press ~ or ~ to adjust the
static gamma.
The adjustment range is within ±5 from center.
4:3 normal
16:9 full
Not defined
(no ID-l data
orHDMI
aspect data)
Natural (with sidebars)
Full
The current picture size you set under
"Selecting the picture size" on page 33.
StatiCGamma
1111111111111111111111111111111111111111
0
• If the setting is moved in the minus direction, the detail
of black colors will be decreased.
• If the setting is moved in the plus direction, the detail of
black colors will be increased.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
I
44
To turn off the auto aspect ratio feature:
Select Off in step 3 above.