Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 26HL47 Owner's Manual

To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press
8.
To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press
8.
Channels Block
Unlocking programs temporarily
I~
y?u try to tune the TV to a program that exceeds the rating
hrruts you set, the TV will enter program lock mode and the
following message will appear on-screen:
This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
Press
M' e r
2
Enter your four-digit PIN code and press
8.
If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD·1, ColorStream
HD-2, HDMI1, HDMI2, HDMI3 and PC) and channels 3 and
4. You will not be able to view the input sources or channels
until you unlock the inputs.
To lock/unlock the video inputs:
1 Press M~U and highlight the Locks menu icon.
2
Press'" to display the PIN code entering screen.
3
Enter your four-digit PIN code and press
@.
4
Press'" to highlight Input Lock and
press~.
5
Press .. or ... to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO I, VIDEO 2, ColorStream HD 11
HD2, HDMI 1, HDMI 2, HDMI 3, and Pc.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HDII
HD2, HDMI 1, HDMI 2, HDMI 3, PC and channels 3 and
4.
• Select Video+ if you have a device such as a VCR
connected to the ANT input.
Off:
Unlocks all video inputs and channels 3 and 4.
6
Press
8.