Connecting A Vcr And Antenna Or Cable Tv (No Cable Box) - Toshiba 26HL47 Owner's Manual

Connecting a VCR and antenna or Cable TV (no Cable box)
••••••••••••••••••••••••••••••••••••••• _ _.. • • • _ ••• _ M
~
••••••••••• _........... • • • • • • • _._ •••••••••••••• _ •• _ _ •••••••••• _ ••••••••••••••••••••••••••••••••••• _ ••••• _ ••• _ ••••••••••
~
••••••••••••••••• _ •••••• _ _ •••••• _ _
L ~Jl ~
PC IN ANH7SCj
TV lower back panel
You will need:
• coaxial cables
• standard AN cables
For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- If you have a mono VCR, connect
UMaNa
on the TV to
your VCR's audio out terminal using the white audio cable
only.
To view the antenna or Cable signal:
Select the ANT video input source on the TV.*
To view the VCR:
Tum ON the VCR. Select the VIDEO 1 video input source on
the TV.*
*
To select the video input source, press INPUT on the remote control
(~page
21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
13 I