Scrolling The Theaterwide® Picture (Theaterwide 2 And 3 Only); Using The Auto Aspect Ratio Feature - Toshiba Regza 32RV530U Owner's Manual

Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press
M8
u
and open the Video menu.
2
Highlight Theater Settings and press @.
Picture Settings
Noise Reduction
ColorMaster
Game Mode Off
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV will
automatically select the picture size when one of the following
input sources is received:
• A 480i, 480p,
nop,
1080i digital signal from the ANTI
CABLE input
• A 480i signal from the Video 1
or
Video 2 input
• A 480i, 480p,
nop,
1080i signal from the ColorStream
HD1
or
HD2 input
• A 480i, 480p, nop, 1080i, 1080p, or VGA (60/72/75Hz)
signal from the HDMI1/213/4 input
·Aspecfratio
;01 .
AUtomaticasp.ect'$ize
(automaficaU
signal source
selectedw~en
Auto
Aspe,ct
is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).
Press
T to highlight the
Picture Scroll field.
Press
~
or
~
to scroll the picture up and down as needed,
from -10 to +20.
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press@.
Note: The auto aspect ratio feature is not applicable to the PC
input.
To turn on the auto aspect ratio feature:
1
From the Video menu, highlight Theater Settings and
press@.
2
In the Auto Aspect Ratio field, select On.
3
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press@.
3
4
5
6
TheaterLock Off
Not defined
(no 10-1 data
or HDMI
aspect data)
The current picture size you set under
"Selecting the picture size" on page 39.
To turn off the auto aspect ratio feature:
Select Off in step 2 above.
41
I