Adjusting The Picture Position; Using The Auto Aspect Ratio Feature - Toshiba 26HL37 Owner's Manual

267470726HL37_EN.book Page 33 Friday, July 6, 2007 7:44 PM

Adjusting the Picture Position

1
Press Y and open the Set Up menu.
2
Press B or b to highlight Picture Position, and then
press T.
AV Connection
Picture Position
MENU Back EXIT
3
Press B or b to highlight the item you want to adjust.
Picture Position
Horizontal Position
Vertical Position
Reset
MENU EXIT
Back
4
Press C or c to adjust the settings as required.
Horizontal Position
–
The display will return to the previous menu after 4
seconds if no button is pressed.
Pressing C
Selection
Horizontal
Moves picture left
Position
Vertical
Moves picture down Moves picture up
Position
To reset to the factory-set status:
Follow steps 1-3 above, select Reset in step 3, and then
press T.
Note:
• The Horizontal Position can be adjusted for 480i and 480p
input signals.
• The Vertical Position can be adjusted in TheaterWide 2 and
TheaterWide 3 modes only.
Chapter 6: Using the TV's features
Set Up 2/2
ENTER
ENTER
Exit
0 0
0 0
ENTER 0
Exit
-2
+
Pressing c
Moves picture right

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the picture size
is automatically selected when one of the following input
sources is received:
A 480i signal from the VIDEO-1, VIDEO-2,
•
ColorStream HD-1, or ColorStream HD-2 input.
A 480i, 480p, 720p, 1080i or 1080p signal from the HDMI1
•
or HDMI2 input.
Aspect ratio Automatic aspect size
of signal (automatically selected when
source Auto Aspect is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined
(no ID-1 data
Selecting the picture size (- page 31)
or HDMI
aspect data)
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
1
Press Y and open the Function menu.
2
Press B or b to highlight Auto Aspect.
Function
CC
CC Reception Adjustment
Favorite Channel
Auto Aspect
Blue Screen
Side Panel
MENU Back EXIT Exit
3
Press C or c to select On.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
1/2
Off
Mode 1
ENTER
On
On
1
33
HL37 (E/F) Web 213:276